Orange County NC Website
Browse       Search
DocuSign Envelope ID: E9612703-F25B-492D-9C8C-EC3F9728ECE6 <br /> owner's personnel trained, and name of person conducting training. <br /> Upon acceptance of this letter, and final inspection and approval of this project, the one year <br /> warranty period on all equipment and systems installed by this Contractor shall start,from that date. <br /> T. ELECTRICAL WORK: <br /> This Contractor shall furnish, and install all electrical starters, disconnect switches, thermostats, <br /> controls,and safety devices required for the proper installation and operation of equipment installed <br /> under this contract. Switches,thermostats and controls shall be located for convenient access if not <br /> specifically located on drawings. <br /> Contractor shall install conduit, power and control wire and outlet boxes for thermostats and <br /> interlocks,and wiring to equipment. This Contractor will pull control wiring and furnish all items of <br /> control equipment. <br /> Work shall be installed in accordance with the most current edition of the National Electrical Code, <br /> and as specified in Section 16 of these specifications. <br /> U. SHOP DRAWINGS: <br /> Upon award of the contract, this Contractor shall submit to the Designer within ten (10) days, for <br /> approval, a list of all proposed sub-contractors and materials he proposes (within the three listed <br /> manufacturers as equivalent)to utilize for approval by Designer, Contractor to include a submittal <br /> schedule/status log listing all items of submittal and shop drawings on AIA Form G712 or similar <br /> form, and within 4 weeks of approval, supply eight(8)sets of shop drawings consisting of detailed <br /> drawings or manufacturer's cuts of all manufactured equipment he proposes to use on the job. The <br /> drawings or cuts shall show details of construction and arrangement and all pertinent data pertaining <br /> to equipment proposed to be furnished. The approval of the Designer shall be obtained before <br /> equipment is ordered for delivery. <br /> Approval of the Designer shall be for general fitness and design only and final approval of <br /> substituted equipment is contingent upon its satisfactory performance. It will be the duty of this <br /> Contractor to verify quantities, dimensions, capacity, and details, and determine suitability of <br /> equipment for installation in space provided. Approval of shop drawings by the Designer does not <br /> relieve this Contractor of the responsibility for coordination, dimensions, quantities, capacity, <br /> features, or details. If submittal shows variations from the contract requirements, the Contractor <br /> shall note on submittal and shall describe all differences (i.e., increased amperage, horsepower, <br /> physical size, capacity, flow, etc.) in writing (on letter of transmittal) separate from notations on <br /> submittal shop drawings. <br /> This Contractor shall check and approve shop drawings making such notations and corrections as <br /> may be appropriate or necessary to comply with specifications before submission to the Designer. <br /> 15H-9 <br />