Agenda - 08-21-2007-4n - Laserfiche WebLink

Browse Search

Name: Ronald and Vivian King Page 5 Address: 406 Split Rail Lane City: Hillsborough, N.C. 27278 Phone: 732-7313 Date: May 1, 2007 FLOOR COVERINGS: BATHROOM & HALLWAY& FURNCE CLOSET: 1. Remove the commode, vinyl and plywood to the framing members. Note: Two layers of sheathing in tlus location. Rehabilitation Specialist to inspect framing before new sheathing is installed. If further damage is present, the Owner, Contractor and Rehabilitation Specialist will review the work and determine a course of action and, if necessary, a cost for any additional work. Install 5/8" CD plywood in the bathroom and hall. Install'/a"pressure treated plywood in the furnace room. Install alI necessary framing to attach new plywood around tub/shower,vanity, commode flange etc. Properly nail new sheathing acid prepare for vinyl. Install''/a" lauan plywood and a new vinyl floor in the hall and bathroom. The vinyl to cost not less than $ 14.00 sq. yard. Install either pre-finished or painted shoe molding at alI wall and cabinet areas. Install metal trim where vinyl meets the carpet in both bedrooms and kitchen floor. INTERIOR DOOR UNITS: Remove the following door units: Bedroom # 2, Bedroom # 3 and hall bathroom. Install new prehurzg door units- 30"bedroom azid 24" bathroom. All doors to be complete with casing, hinges and privacy locksets. Doors and trim to be either pre-finished or primed and painted. AlI doors to open, close and lock properly. Doors to be complete. INTERIOR PAINTING: 1. Prepare the following rooms for paint: Bedroom # 2, Bedroom # 3 ;hall the hall bathroom. Prepare and clean the walls for paint. Fill all holes and damaged areas with filler. Caulk all holes and prepare £or primer. Prime the walls and trim with an oil based pz7mer. Paint the walls and trim in the batluoorn with semi-gloss Latex paint. Paint the walls in the bedrooms and hall with flat latex paint. Paint the trim with semi-gloss latex paint.