Agenda - 09-19-2007-6b1 - Laserfiche WebLink

Browse Search

At any time prior to completion of the period of warranty, the Designer may submit to the CMAR a supplemental deficiency list, in which case the CMAR shall complete or correct any and all new items identified on the Supplemental deficiency list. 3.10.14 Final Completion In consultation with the Designer, the CMAR shall determine when the Project and the Contractor's Work are finally completed and, following completion of corrections, shall issue a Certificate of Final Completion to the Owner. Upon delivery of the Certificate of Final Completion to the Owner, the CMAR shall make all remaining payments due to Gontractors. 3.10.15 Protection of the Work. Prooertv and the Public The CMAR shall be responsible for the entire site and shall provide all the necessary protections required by the Owner and by laws or ordinances governing safety and protection of property. Consistent with the indemnification provisions elsewhere in this Agreement, and subject to the benefits of any Owner-controlled or Owner-provided insurance that covers the interests of the CMAR and its Contractors, the. CMAR shall be responsible for protecting the public and those on the site against all bodily injury or harm, and protecting against any damage to the Work, to adjacent property, and to property of others. The CMAR shall have access to the Project at all times. Subject to its ultimate contractual responsibility for protection of work, property and the public under this Agreement, and subject to any non-delegable duties imposed by law, the CMAR may delegate to Contractors these obligations of the CMAR under this Agreement, and may obtain indemnification and insurance from Contractors as the CMAR deems reasonable and prudent. 3.10.15.1 The CMAR shall provide cover and protect all portions of the structure when the Work is not in progress, provide and set all temporary roofs, covers for doorways, sash and windows, barricades, and all other materials necessary to protect all the Work on the building, whether set by it, or any of the Contractors. Any completed Work or Work in progress damaged through the lack of proper protection or from any other cause shall be repaired or replaced without extra cost to the Owner.3.10.15.2 No fires of any kind will be allowed inside or around the operations during the course of construction. 3.10.15.3 The CMAR shall protect all trees and shrubs designated to remain in the vicinity of the operations by building substantial protection around same. The CMAR shall barricade all walks, roads, etc., as authorized by the Owner to keep the public away from the construction. All trenches, excavations or other hazards in the vicinity of the Work shall be well barricaded and properly lighted at night. 3.10.15.4 The CMAR shall develop and implement a Project Safety Program. The Owner may reject the Project Safety Program and require that it be rewritten if in the Owner's reasonable opinion the Safety Program is inadequate. The CMAR shall report, to the Owner, as part of the MIS, any safety violations and actions taken to protect the safety of persons and property engaged in the Project. The CMAR shall require that all Contractors meet or exceed the Project Safety Program requirements including where those requirements meet or exceed State or Federal requirements. 3.10.15.5 In the event the' Owner implements an Owner Controlled Insurance Program ("OCIP"), the CMAR agrees to cooperate and coordinate with any safety plan or risk management plan implemented in connection with the OCIP. 3.10.15.6 The CMAR shall implement the Project Safety Program for the protection of all persons on the job, including the requirements of the A.G.C. Accident Prevention Manual in Construction, as amended, and shall fully comply with all state laws or regulations and North Carolina State Building Code requirements to prevent accident or injury to persons on or about the location of the Work. The CMAR shall clearly mark or post signs warning of hazards existing, and shall barricade excavations, elevator shafts, stairwells, floor and wall openings and similar hazards. The CMAR shall protect against damage or injury resulting from falling materials and shall maintain all protective devices and signs throughout the progress of the Work. 3.10.15.7 The CMAR shall, at a minimum, adhere to the rules, regulations and interpretations of the North Carolina Department of Labor relating to Occupational Safety and Health Standards for the Construction Industry. 3.10.15.8 As part of the .Project Safety Program the CMAR agrees to implement a Public Hazard Control Plan conforming to the standards set forth in ANSI A10.34-2005R. The Public Hazard Control Plan shall be submitted to the Owner for review and approval before construction begins on the Project. 3.10.15.9 The CMAR shall designate a responsible member of its organization as safety inspector, whose duties shall include 14