Agenda - 12-11-2007-4lxtr - Laserfiche WebLink

Browse Search

2.4 The Wark ofi all trades under the Contract Documents shall be coordinated by the Contractor in such a manner as to obtain the best workmanship possible for the Work and all components of the Wark shall be installed or erected in accordance with the best practices of the pacficular trade. 2.5 The Contractor shall fully complete the Work and shall be responsible for all of the Work under the Gantract Documents to which the Construction Agreement applies. if the Contractor is prevented from doing so by any limitation of the Gon#ract Documents, the Contractor shall fmmediafeiy give notice thereof to the CMAR in writing before proceeding with the construction In the area where the problem or timitafson exists. 2.6 Standard specl€ications ar manufacturers' literature, when referenced, shalt be of the taiest revision or printing unless otherwise stated and is Intended to establish the minimum requirements acceptable. 2.7 For those materials. specked without the use of brand names, the Contractor shalt submit to the CMAR within thirty (30} days after its receiving the Construction Agreement far signatures, any product that meets the express requirements of the Specifications; unless a Langer #ime is agreed to in the Master Schedule. Such Submittal shall Include manufacturer's data, test reports, performance data and cer#tficafions, samples, erection details, and other applicable information as required to permit determination by the Designer whether such proposed products are suitable. The Designer shall be the sole judge as to the suitability of any proposed product. The burden of proof of quality rests with the Contractor. 2,8 The Contractor is required to examine and read the complete set of Drawings and Specifications for the Project far Infannation concerning the Wortc, because same of the " " ` "~ 'Work for which the Contractor will be responsible may be indicated on ar in documentation appiying~primarity to the Wark~of one ar more other separate prime contractors. No allowance will be made for the Contractor's failure fo become familiar with the complete set of Project Drawings and Specifications. 2.9 Contractor's requests for clarification or information shall clearly define the causets) of the Contractor's request and, as appropriate, shalt include the Contractor's interpretation and the Contractor's proposed solution. ARTtCLE 3. PAMtLtAR1TY WITH WORK, CONDITIOi~JS Al1t? LAWS 3.1 The Contractor has investigated prior to bidding and is satisfied with all conditions affecting the Work, including but not restricted to those bearing upon transportation, disposal, handling and storage of materials, availability of tabor, water, electrical power, roads and uncertainties of weather, or similar physical condittans at the Project site, and the character of equipment and facilities needed prior to and during prosecution of the Work. The Contractor is safisfred as io the character, quality and quant€ty of surface and subsurface materials or obstacles to be encountered Insofar as this information is reasonably asaer#ainable from inspection ofi the Project site, including alt exploratory work done by the Owner, as west as from information presented by the Contract >?ocuments, ar any other information made available to the Contractor prior to receipt of bids. Any failure by the Contractor to become acquainted with the available Information shall not relieve the Contractor from the responsibility far estimating properly the difficulty or cast of successfully performing the Work. _ 3.2 The Contractor shall be entitled to rely upon all information furnished to the Cantractar in writing by the CMAR with respect to the Project site and to make alE inferences from it that GENERAL CC)NQITIO?~S FOR CM AT RISK PROJECT 7 of 42 JUNE 20x7 ED1TEOlb