Orange County NC Website
DocuSign Envelope ID:489DFD84-DFCE-4E07-BB35-5F6A708DFA3A <br /> value engineering with the Designer and the Owner) dated 6/30, 2015. which fully <br /> describes the work to be performed, such work(hereinafter called the "Work"). <br /> d. Related documents listed under Section 1 above. <br /> 3. TERM AND SCHEDULING <br /> a. The Contractor agrees to commence work pursuant to the written Notice-to Proceed. <br /> b. The Contractor agrees to complete substantially all Work included by no later than 90 <br /> calendar days after the Notice to Proceed letter is issued and according to a mutually <br /> agreeable schedule between the Owner and Contractor. Assuming that the Notice to <br /> Proceed is issued on August 10, 2015, the date for Substantial Completion will be no later <br /> than November 7, 2015. <br /> c. Time is of the essence with respect to all dates specified in the Contract Documents as <br /> Completion Dates. <br /> d. The Contractor shall perform the Work in the time, manner and form required by the <br /> Contract Documents and as stipulated in a written Notice-to-Proceed to be executed by the <br /> Contractor and Owner. <br /> e. It is expressly understood that the Owner will employ other contractors to perform work as <br /> a part of the Project whose work will be performed simultaneously and sequentially with <br /> the performance of the Work by the Contractor. It shall be necessary for the Contractor to <br /> coordinate its activities with such other contractors, particularly with respect to access to <br /> work areas, storage of materials and other common facilities. <br /> f. Should the Owner determine that the Contractor is behind schedule Owner may require, at <br /> no additional cost to the Owner, the Contractor to expedite and accelerate its efforts, <br /> including providing additional resources and working overtime, as necessary, to perform <br /> the Work in accordance with the approved proj ect schedule. <br /> 4. STANDARD OF CARE <br /> a. The Contractor shall exercise reasonable care and diligence in performing the Work in <br /> accordance with the highest generally accepted standards of this type of Contractor <br /> practice throughout the United States and in accordance with applicable federal, state and <br /> local laws and regulations applicable to the performance of these services. Contractor is <br /> solely responsible for the professional quality, accuracy and timely completion and/or <br /> submission of all work. <br /> b. The Contractor shall not load or permit any part of the Work to be loaded with a weight <br /> that will endanger its safety, intended performance or configuration. <br /> c. Contractor shall be responsible for all errors or omissions caused by its employees, agents, <br /> contractors, or assigns in the performance of the Agreement. Contractor shall correct any <br /> and all errors, omissions, discrepancies, ambiguities, mistakes or conflicts at no additional <br /> cost to the Owner. <br /> Revised 10/14 2 <br />