Orange County NC Website
Browse       Search
on corner lots and through lots, width requirements shall <br /> be considered met if the regular lot has one frontage meeting <br /> such requirements and contains a buildable area of width: <br /> depth and area at least equivalent to that remaining on a <br /> rectangular interior lot of minimum dimensions required in <br /> the district.' <br /> 4) Lot Frontage on Regular Lots <br /> a) on regular interior lots, the Errant shall be construed as <br /> the portion nearest the street. as <br /> b) on regular corner lots,ad ota astreet.coif tthedlot <br /> the shortest boundary 3 acent <br /> has equal frontage an two streets,£sorfitoandgsi.deasetbacks. <br /> construed in setbacks$ but, . meured <br /> For most lots, depth of,a rear so that the shall be setback <br /> perpendicular to the lot line, <br /> is a strip of the minimum depth prescribed by district <br /> regulations. However, in the case of lots angle ri pointing <br /> lines intersect in the general form of an ang <br /> away from the street, the required rear setback shall be <br /> construed as running between the apex of the angle and a <br /> line parallel to the rear line of the required front set- <br /> back, and at the distance prescribed for a reremai backof <br /> from the'apex of the angle, <br /> such lot dines, side setback requirements shall apply- <br /> e) side setback on regular lots are setbacks running from the <br /> rear line of the front setback to the front line of the <br /> rear setback. Depth of side slimes shall be measured the required <br /> perpendicular to the side lot == depth prescribed by <br /> setback is a strip of the mini== <br /> district regulations. <br /> 22.4.10 Lot. Irreg _ <br /> ular <br /> lot so located, shaped or oriented to adjacent lots that <br /> application of general measurement methods Or setback dimen- <br /> sional requirements of the distric5eanand/or withslocation <br /> serves no significant public purpo <br /> (front, side and rear) not logically <br /> of wracks by type <br /> determined by nor related to setback patterns on nearby <br /> regular lots. An irregular lot shall betconsidered tin meet <br /> dimensional and related requirementS <br /> which it is located only if it meets the following conditions: <br /> 1) Dimensional and Related Requirements: <br /> meet <br /> a) Minimum lot area, computed as for regular lots, structures. <br /> district requirements for the proposed <br /> 22-»10 <br />