Orange County NC Website
Browse       Search
24 <br /> The raceway shall be fabricated of aluminum(.050 d.063)and shall be uniformly seven inch by <br /> seven inch(T'x Tj square to allow appropriate internal reinforcing and adequate service access <br /> to all hardware. <br /> The raceway shall be attacied using through belts penetrating the facia with angle iron backups. <br /> No toggle bolts will be allowed. Bolt penetration to be properly caulked and sealed. Back of <br /> raceway to be separated from building surface with nylon spacers. <br /> The wiring bar(raceway)will be painted to match adjaoert building surface. <br /> On signs featuring separate words, separate wiring bass are required. <br /> FXmosed electrical conduit is not pemtitted. All sign supports must be painted to match raceway, <br /> unless they can be constructed of Black Ruropon. <br /> ELECTRICAL SERVICE <br /> For 184nch to 244nch high letters, use two rows of neon tubing inside the sign letter. <br /> Al electrical wiring must be "LA:' approved inspected and approAmately tagged prior to <br /> installation. <br /> The sign lighting must be continuous and noninterrupted(no flashing or blinking, etc.) <br /> TRANSFORMERS <br /> Only 30 milllamp transformers will be permitted. <br /> Once again,you may be held liable and bear all costs for removal ardor correction of signs,sign <br /> installation and damage to building by signs that do not coda m to the sign criteria as set forth <br /> in the above-mentioned specifications. <br /> MAINTENANCE <br /> In the evert signage is in need of repair, it is Tenant's responsibility to repair signage <br /> immediately. H after fifteen days notification to repair sign no action has been taken by Tenant, <br /> Landlord shall contract to repair ardor maintain sign at Tenant's sole expense. <br /> 21 <br />