Orange County NC Website
Browse       Search
SECTION 01700 EXECUTION REQUIREMENTS <br /> PART I - GENERAL <br /> 1.1 RELATED DOCUMENTS <br /> A. Drawings and general provisions of the Contract, including General and <br /> Supplementary Conditions and other Division 01 Specification Sections, apply <br /> to this Section. <br /> 1.2 SUMMARY <br /> A. Section includes general administrative and procedural requirements governing <br /> execution of the Work including, but not limited to, the following: <br /> 1. Construction layout. <br /> 2. Field engineering and surveying. <br /> 3. Installation of the Work. <br /> 4. Cutting and patching. <br /> 5. Coordination of Owner-installed products, if applicable. <br /> 6. Progress cleaning. <br /> 7. Starting and adjusting. <br /> 8. Protection of installed construction. <br /> 9. Correction of the Work. <br /> B. Related Sections: <br /> 1. Division 01 Section "Submittal Procedures" for submitting surveys. <br /> 2. Division 1 Section "Project Management and Coordination" for procedures <br /> for coordinating field engineering with other construction activities. <br /> 3. Division 01 Section "Closeout Procedures" for submitting final property <br /> survey with Project Record Documents, recording of Owner-accepted <br /> deviations from indicated lines and levels, and final cleaning. <br /> 1.3 DEFINITIONS <br /> A. Cutting: Removal of in-place construction necessary to permit installation or <br /> performance of other work. <br /> B. Patching: Fitting and repair work required to restore construction to original <br /> conditions after installation of other work. <br /> January 2014 Project# 13.01126 01700-1 <br /> 1 1 <br />