Orange County NC Website
Browse       Search
3. Submittal Review Time: Include review and resubmittal times indicated in <br /> Division 01 Section "Submittal Procedures" in schedule. Coordinate <br /> submittal review times in Construction Schedule with submittal schedule. <br /> 4. Startup and Testing Time: Within the Construction Schedule, include an <br /> appropriate number of days for startup and testing based on the scope of <br /> the project. <br /> 5. Substantial Completion: Indicate completion in advance of date <br /> established for Substantial Completion, and allow time for administrative <br /> procedures necessary for certification of Substantial Completion. <br /> 6. Punch List and Final Completion: Include not more than 30 days for <br /> punch list and final completion. <br /> C. Constraints: Include constraints and work restrictions indicated in the Contract <br /> Documents and as follows in schedule, and show how the sequence of the <br /> Work is affected. <br /> 1. Phasing: Arrange list of activities on schedule by phase. <br /> 2. Products Ordered in Advance: Include a separate activity for each <br /> product. Include delivery date indicated in Division 01 Section <br /> "Summary." Delivery dates indicated stipulate the earliest possible <br /> delivery date. <br /> 3. Work Restrictions: Construction Schedule shall account for and show the <br /> effect of the following items on the schedule: <br /> a. Coordination with existing construction. <br /> b. Limitations of continued occupancies. <br /> C. Uninterruptible services. <br /> d. Partial use/occupancy before Substantial Completion. <br /> e. Use of premises restrictions. <br /> f. Seasonal variation/restrictions. <br /> g. Environmental control. <br /> 4. Work Stages: Indicate important stages of construction for each major <br /> portion of the Work, including, but not limited to, the following: <br /> a. Subcontract awards. <br /> b. Submittals. <br /> C. Purchases. <br /> d. Fabrication. <br /> e. Sample testing. <br /> f. Deliveries. <br /> g. Installation. <br /> h. Tests and inspections. <br /> i. Adjusting. <br /> j. Curing. <br /> k. Startup and placement into final use and operation. <br /> January 2014 Project# 13.01126 01320-4 <br />