Orange County NC Website
Browse       Search
only after providing temporary utility services according to requirements , <br /> indicated: <br /> 1. Notify Owner and Engineer not less than 7 days in advance of proposed ' <br /> utility interruptions. <br /> 2. Obtain Engineer's written permission before proceeding with utility <br /> interruptions. <br /> D. Noise, Vibration, and Odors: Coordinate operations that may result in high <br /> levels of noise and vibration, odors, or other disruption to Owner occupancy <br /> with Owner. <br /> 1. Notify Owner and Engineer not less than 3 days in advance of proposed r <br /> disruptive operations. <br /> 2. Obtain Engineer's written permission before proceeding with disruptive , <br /> operations. <br /> E. Nonsmoking Building: Smoking is not permitted within any building or within 25 <br /> feet of entrances, operable windows, or outdoor air intakes. ' <br /> F. Controlled Substances: Use of tobacco products and other controlled <br /> substances within any building (existing or constructed as part of this project) is ' <br /> not permitted. <br /> G. Employee Identification: Provide identification tags for Contractor personnel ' <br /> working on the Project site. Require personnel to utilize identification tags at all <br /> times. <br /> H. Employee Screening: Comply with Owner's requirements regarding drug and , <br /> background screening of Contractor personnel working on the Project site. <br /> 1. Maintain list of approved screened personnel with Owner's ' <br /> Representative. <br /> 1.10 SPECIFICATION AND DRAWING CONVENTIONS <br /> A. Specification Format: The Specifications are organized into Divisions and ' <br /> Sections using the 16-division format and CSI/CSC's "Master Format" <br /> numbering system. ' <br /> 1. Section Identification: The Specifications use Section numbers and titles <br /> to help cross-referencing in the Contract Documents. Sections in the ' <br /> Project Manual are in numeric sequence; however, the sequence is <br /> incomplete because all available Section numbers are not used. Consult <br /> the table of contents at the beginning of the Project Manual to determine ' <br /> numbers and names of Sections in the Contract Documents. <br /> January 2014 Project#13.01126 01100-4 ' <br />