Orange County NC Website
5 <br /> 1. Install a six panel,metal insulated door unit at the basement entrance. <br /> Install silicone sealant under the threshold. Install lockset and deadbolt with <br /> matching keys. Install a peephole. Install matching interior trim. <br /> 2.Install a six panel metal insulated 3-0 door unit at the front entrance. Install <br /> a lockset and deadbolt keyed to the basement locks.Install a peephole. Install <br /> matching interior trim.Repair all areas disturbed by this operation. <br /> 2..Install three wood core,seamless aluminum storm doors with pneaumatic closures <br /> and vinyl sweeps. <br /> 3. Install a crawlspace access door of 3/4 inch exterior grade plywood with a <br /> 2x6 pressure treated frame.Install galavanized hinges and locking hasp. <br /> 4.Install door bumps on all doors. <br /> 5.Remove the existing closet doors in the dining room and install new sliding <br /> doors complete with hardware. <br /> 6.Prepare and frame the opening to the basement and install a prehung wood, <br /> interior door unit and hardware.Install 1/4 inch paneling and trim on the bare <br /> studs <br /> WINDOWS: <br /> 1. Inspect all windows and insure proper operation. <br /> 2.Replace all broken glass. <br /> 3.Install two vinyl,insulated replacement windows in the laundry room. <br /> 4.Install triple track storm windows on all windows but the laundry room and <br /> front picture window. <br /> INTERIOR: <br /> 1.Repair the existing sheetrock/plaster by covering all cracks with fiberglass mesh <br /> tape,covering all holes and railheads.Finish all repairs smooth. <br /> 2.Install shoemold in the utility room. <br /> 3. Remove the wall covering to the studs in the bath. <br /> 4. Install MR sheetrock on the walls.Tape and finish smooth. <br /> 5. Install 13/4 inch crown mold and baseboard in the bath. <br /> 6. Install a fiberglass tub enclosurer kit with comer shelves. <br /> 7.Repair the existing ceiling in the utility room.Spray with ceiling texture so that <br /> the repairs match the existing texture. <br />