Orange County NC Website
Browse       Search
Article 3: Base Zoning Districts <br /> Section 3.5: Industrial Districts <br /> 40,000 square feet and 1.99 acres in size;zoning lots two acres and greater in size shall have a minimum <br /> usable lot area of at least 40,000 square feet. <br /> 6. Access shall consist of direct vehicular access to streets designated either arterial or collector by the <br /> adopted Comprehensive Plan.Access to rail service is desirable but not required. <br /> 7. Proposed subdivisions are subject to all applicable subdivision standards detailed in Article 7. Note that <br /> Article 7 provides for different dimensional requirements than those shown in the Dimensional and Ratio <br /> Standards table depending upon the type of subdivision proposed and the percentage of open space <br /> provided. <br /> 8. Subdivisions proposing private roads are subject to larger setbacks and minimum lot sizes than those listed <br /> in the Dimensional and Ratio Standards. Refer to Section 7.8.4 for additional requirements. Refer to <br /> Section 7.8.5 for private road standards. <br /> 9. Subdivisions in the Economic Development, Commercial and/or Industrial Nodes are subject to the <br /> procedure outlined in Section 2.16. <br /> Orange County,North Carolina—Unified Development Ordinance Page 3-39 <br />