Orange County NC Website
Browse       Search
Article 3: Base Zoning Districts <br />Section 3.5: Industrial Districts 309 <br />property is located. Refer to Section 4.2.6 for a breakdown of the allowable impervious surface area. <br />Additionally, Section 4.2.6 may require a larger lot size for non - residential uses than is contained in the <br />Dimensional and Ratio Standards Table. <br />5. For lots outside of a Watershed Protection Overlay District (see Section 4.2), the minimum usable lot area <br />for lots that utilize ground absorption wastewater systems shall be 30,000 square feet for parcels between <br />40,000 square feet and 1.99 acres in size; zoning lots two acres and greater in size shall have a minimum <br />usable lot area of at least 40,000 square feet. <br />6. Proposed subdivisions are subject to all applicable subdivision standards detailed in Article 7. Note that <br />Article 7 provides for different dimensional requirements than those shown in the Dimensional and Ratio <br />Standards table depending upon the type of subdivision proposed and the percentage of open space <br />provided. <br />7. Subdivisions proposing private roads are subject to larger setbacks and minimum lot sizes than those listed <br />in the Dimensional and Ratio Standards. Refer to Section 7.8.4 for additional requirements. Refer to <br />Section 7.8.5 for private road standards. <br />8. Subdivisions in the Economic Development, Commercial and /or Industrial Nodes are subject to the <br />procedure outlined in Section 2.16. <br />the pmpepty, and the let Or. gF aGFes in size, a Glass A SpeGial Use Permit and Site Plan, <br />i Q. OR paFGels less thaR two aGres in size, multiple n9A FesideRtial uses shall be GgAtaiRed withiR -a-singlee <br />ether- 6heFt rtem; lease, shall Rot be G9RsideFed aR additiGRa. <br />Orange County, North Carolina - Unified Development Ordinance rage 1-4-1 <br />