2011-254A Housing - Citty's Plumbing and Pools, Inc. - Construction Agreement

Browse Search

SPECIFICATIONS Rogers Road Community Water and Sewer Connection Grant Project Orange County has received a grant to install water and sewer service connections to serve several houses in the Rogers Road community, northwest of Chapel Hill, NC. The number of connections and estimated distance to service main for each is shown in Attachment 1. These water and sewer services will be installed according to OWASA standard specifications and will require a plumbing permit from the Town of Chapel Hill. It will be the Contractor's responsibility to comply with OWASA's specifications and with the plumbing code requirements upheld by the Town of Chapel Hill. In general,the project will consist of the following: Water Service Connections • Cut and cap the existing supply line that runs from the existing well to the residence. • Install a pressure reducing valve and a gate valve on the"house"side of the existing water line. These valves should be installed in a meter box . • Install a 3/d'water line between the existing meter base and the pressure reducing valve/gate valve assembly. • Install a Watts Ball cock w/pressure release valve in an existing water closet inside the residence. • Include all applicable permits to do this work in your bid. • All valves and lines are 3/a". • Seed and straw disturbed areas when done. • Contractor will provide any traffic control or other safety measures according to the most current NC DOT, OSHA or other safety requirements related to the work being performed. Sewer Service Connections • Excavate to existing sewer main. • Coordinate with OWASA, who will drill tap into ductile iron sewer main and install saddle. • Install 4" ductile iron service lateral and cleanout to property line (see OWASA Standard Detail, Attachment 2). • Install 4" PVC Schedule 40 service lateral to connect existing residence wastewater system to 4" ductile iron cleanout at property line. • Cap existing wastewater line to septic tank. • Seed and straw disturbed areas when done • Contractor will provide any traffic control or other safety measures according to the most current NC DOT, OSHA or other safety requirements related to the work being performed. Bids will be awarded based on the total project cost. Installation of water and sewer line will be bid on a per foot basis. The water and sewer line portion of the project cost will be determined by multiplying the per foot price times the estimated service line distances provided by the County in Attachment 1. The other portions of the project, e.g. mobilization, excavation, permits, valves, etc., will be bid as a lump sum. The per foot price included in the bid will be the price used to pay(or deduct) for any differences in the estimated distances and the actual service line lengths. BID DOCUMENT 1623 PAGE 4 OF 4