Orange County NC Website
Browse       Search
Name: James Grady <br />Address: 205 Rencher St. <br />City: Hillsborough, NC 27278 <br />Phone Number: 245-1298 <br />Date: July 1, 2004 <br />MASTER BEDROOM: <br />Install a 30 inch flush interior door unit. Install casing to match the <br />existing trim. Install a privacy lockset. Paint the door & trim with <br />semi-gloss latex paint. The paint shall cover completely. <br />2. Re-install all loose trim on the ceiling. <br />3 <br />Repair the damaged wall below the window. Install insulation, <br />wall covering & trim. Prepare this section for paint. Apply sheetrock <br />filler and tape to all seams, holes & cracks. Sand the filler smooth. _ <br />4. Remove all existing closet doors & hardware. Prepare the three <br />openings for new flush doors & jambs. Install a twin unit (72") and <br />single (36")interior door units. Install all necessary framing. Install <br />passage locksets on all three doors. Install a necessary hardware. <br />Paint the doors, jambs & trim with semi-gloss latex paint. _ <br />5. Prepare the walls for paint. Apply sheetrock filler to all holes and <br />cracks. Prime the walls & trim with an oil bonding primer. <br />Paint the walls with flat latex paint. Paint the trim with semi-gloss <br />latex paint. The paint shall cover completely. <br />6. Install 3 %a"baseboard. Prime the new wood with an oil bonding <br />primer. Paint the baseboard with semi-gloss latex paint. The paint <br />shall cover completely. <br />FRONT RIGHT BEDROOM: <br />2. <br />Install an interior flush door unit. Install matching casing & privacy <br />lockset. Finish the door & casing to match the existing trim. _ <br />Remove the existing crown molding. Install matching wall paneling <br />at all needed areas. Insta113" stained crown molding. _ <br />11 <br />3. Install a stained closet door & trim. Re-work the closet shelves so <br />the door will close properly. Install a passage lockset. <br />