Orange County NC Website
Browse       Search
� t <br />All anoles shall be oriented <br />so Ih the le leg sticking <br />out Is o ang ward top of tower. <br />Space <br />NSX Section Detail <br />Assembly Notes: <br />1. A spacer shall be installed at the Intersection of each pair of diagonals. <br />2. A part number Is stamped on the bottom footpad of each leg. <br />3.•A part number is stamped and /or labeled on the bottom end of each diagonal <br />bracing angle. <br />4. Be sure to place diagonal bracing angles In the correct positions. Depending <br />on the section width and taper, the angle in the top panel may be longer than <br />they are in a middle panel because the vertical spacing between side plate <br />connections is greater in the top panel <br />5. The bolt head must bear against the diagonal bracing, and the lockwasher <br />and nut must bear against the side plate to ensure the bolt threads are not In <br />the shear plane of the connection. <br />Cover Plates <br />One plain nut and one lockwasher per bolt. <br />NSX Leg Connection Detail <br />I REV I Jay I DATE I - DESCRIPTION I <br />One plain nut and one lockwasher per bolt. <br />NSX Bracina Connection Detail <br />0•yC'�'y': <br />SEAL <br />- 031809 4y6•� <br />Yelps <br />TITLE: <br />Contemporary Constructors <br />NELLO <br />NSX 29.0 x 350.8' CORPORATION <br />Piedmont Electric, 1301 Stahly Drive <br />Hillsborough, NC Nappanee, IN 48550 <br />Bus: (574)773-4827 <br />Fax: (574)773-5840 <br />DWG No: 110449 <br />SHEET: 2 OF 8 <br />COPYRIGHT NOTIGh: I DRAWN BY: RCH <br />Ths drewma is the property of <br />Nello Inn It In not to be reproduced, CHECKED: AM I ORIG. DATE: 5112/2008 <br />mixed or Vaud In whole or in part <br />without mr written consent ENG. APP: JML I DWG. FROG: V2.01 <br />