Agenda - 02-03-2009 - 6b - Laserfiche WebLink

Browse Search

113 parameters measured and taking into account verification methodologies for Environmental Benefits. 111 13s5-Such Gas Flow Meters shall be owned,operated,maintained and calibrated by the University at its sole cost and expense. The Gas Flow Meters shall be designed and operated to provide time-synchronized data for MMBtu and to provide all other information required to be measured pursuant to this Agreement The University's Gas Flow Meters shall be sealed,with the seals broken only for the purpose of inspecting, testing, repairing, or recalibrating the metering devices. The University shall keep its Gas Flow Meters accurate and in good working order and the University shall periodically test such metering equipment as the University deems necessary; provided that the University shall test its metering equipment at least once every six(6)months, but in no case less than any testing requirement set forth in any applicable Laws or manufacturers' recommendations. In the event a Gas Flow Meters is to be tested,cleaned,repaired or recalibrated, or otherwise read or inspected by the University,the University shall provide the County with five (5)days prior written notice of any such procedure, so that the County may be present during any such procedure. The University shall preserve all charts, test data and similar records in accordance with the record retention provisions of Paragraph X491 8 of this Agreement. The County shall have the right to install and maintain its own Gas Flow Meters. 135. -The County and its agents shall have the right from time to time,at reasonable times during the Term, to monitor, access, and inspect the condition and use of the LFG Project and to monitor, access, and inspect work in progress and the day-to-day operation of the LFG Project Any such monitoring, examinations, inspections or visits shall be conducted in a manner -so as to cause minimum interference with the University's LFG Project {00022477.DOC}